Product Description
A complete vapor-style restoration kit for refinishing compatible oxidized plastic headlight lenses after proper sanding and surface preparation. The heated atomizer applies the supplied repair fluid as a controlled vapor to the prepared lens.
Key Features
- 800 g of headlight repair fluid
- Heated atomization cup with elbow and flat-nozzle covers
- 110–220 V household power adapter and 12 V vehicle power adapter
- Six sandpaper grits: 180, 240, 360, 600, 800, and 1200
- Grinding plate, masking tape, sealing ring, and recovery funnel
- Instruction manual, two disposable masks, and portable storage case
Vehicle Compatibility
This maintenance kit is not tied to a specific year, make, or model and is fitment exempt. Confirm that the lens is a compatible plastic material and that the damage is limited to surface oxidation, haze, or repairable scratching. It will not correct internal condensation, failed reflectors, broken housings, deep cracks, or electrical faults.
Application Note
Protect adjacent paint and trim, then sand the lens evenly through the appropriate grit progression before cleaning and drying it. The supplier describes using approximately 60–80 mL of fluid in the heated atomizer, but the included manual and fluid instructions must control the exact fill level, temperature, distance, passes, and curing procedure.
Safety Note
Heated restoration fluid and vapor can cause serious injury or surface damage if misused. Work in a well-ventilated area, wear chemical-resistant gloves, eye protection, and properly rated respiratory protection, keep the atomizer upright on a stable surface, avoid inhaling vapor, and keep it away from flames, heat, children, and pets. Allow the equipment to cool before handling or storage.
Independent Reseller Notice
Parts Island independently resells this product and is not its manufacturer unless the listing expressly states otherwise. Any company, brand, product, vehicle, or model names shown or referenced are used only to identify the product, design, or compatibility. All third-party marks remain the property of their respective owners.
